Using a reverse proxy is a common practice. The following configurations are the most recommended and used ones.

Important, the headers are considered to resolve the public are X-Forwarded-Proto for the protocol and Host for the domain, please include them in your configuration.

Apache

Apache and mod_proxy should not decode/encode slashes and leave them as they are:

For installing at relative path, /npm, on the server

<VirtualHost *:80>
  AllowEncodedSlashes NoDecode
  ProxyPass /npm http://127.0.0.1:4873 nocanon
  ProxyPassReverse /npm http://127.0.0.1:4873
</VirtualHost>

For installing at root path, /, on the server

<VirtualHost *:80>
  ServerName your.domain.com
  ServerAdmin hello@your.domain.com
  ProxyPreserveHost On
  AllowEncodedSlashes NoDecode
  ProxyPass / http://127.0.0.1:4873/ nocanon
  ProxyPassReverse / http://127.0.0.1:4873/
</VirtualHost>

Configuration with SSL

Apache virtual server configuration.

    <IfModule mod_ssl.c>
    <VirtualHost *:443>
        ServerName npm.your.domain.com
        SSLEngine on
        SSLCertificateFile      /etc/letsencrypt/live/npm.your.domain.com/fullchain.pem
        SSLCertificateKeyFile   /etc/letsencrypt/live/npm.your.domain.com/privkey.pem
        SSLProxyEngine          On
        ProxyRequests           Off
        ProxyPreserveHost       On
        AllowEncodedSlashes     NoDecode
        ProxyPass               /       http://127.0.0.1:4873/ nocanon
        ProxyPassReverse        /       http://127.0.0.1:4873/
        RequestHeader set       X-Forwarded-Proto "https"
    </VirtualHost>
    </IfModule>

Invalid checksum

Sometimes the gzip compression can mess with the request when running npm install and result in error messages like this:

npm WARN tar TAR_ENTRY_INVALID checksum failure
npm WARN tar zlib: incorrect data check

A possible fix for this, can be by disabling gzip compression for the virtual host, by adding this to your config:

SetEnv no-gzip 1

Resulting in a config like so:

<VirtualHost *:80>
  AllowEncodedSlashes NoDecode
  SetEnv no-gzip 1
  ProxyPass /npm http://127.0.0.1:4873 nocanon
  ProxyPassReverse /npm http://127.0.0.1:4873
</VirtualHost>

You should only add it to your virtual host config, if you are experiencing the issue.

Nginx

The following snippet is a full docker example can be tested in our Docker examples repository.

upstream verdaccio_v4 {
    server verdaccio_relative_path_v4:4873;
    keepalive 8;
}

upstream verdaccio_v4_root {
    server verdaccio_relative_path_v4_root:8000;
    keepalive 8;
}

upstream verdaccio_v3 {
    server verdaccio_relative_path_latest_v3:7771;
    keepalive 8;
}

server {
    listen 80 default_server;
    access_log /var/log/nginx/verdaccio.log;
    charset utf-8;

    location / {
      proxy_set_header X-Real-IP $remote_addr;
      proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
      proxy_set_header Host $host;
      proxy_set_header X-NginX-Proxy true;
      proxy_pass http://verdaccio_v4_root;
      proxy_redirect off;
    }

    location ~ ^/verdaccio/(.*)$ {
      proxy_set_header X-Real-IP $remote_addr;
      proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
      proxy_set_header Host $host;
      proxy_set_header X-NginX-Proxy true;
      proxy_pass http://verdaccio_v4/$1;
      proxy_redirect off;
    }

    location ~ ^/verdacciov3/(.*)$ {
      proxy_set_header X-Real-IP $remote_addr;
      proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
      proxy_set_header Host $host;
      proxy_set_header X-NginX-Proxy true;

      proxy_pass http://verdaccio_v3/$1;
      proxy_redirect off;
    }
}

SSL example

server {
    listen 80;
    return 302 https://$host$request_uri;
}

server {
    listen 443 ssl http2;
    server_name localhost;

    ssl_certificate     /etc/nginx/cert.crt;
    ssl_certificate_key /etc/nginx/cert.key;

    ssl on;
    ssl_session_cache  builtin:1000  shared:SSL:10m;
    ssl_protocols  TLSv1 TLSv1.1 TLSv1.2;
    ssl_ciphers HIGH:!aNULL:!eNULL:!EXPORT:!CAMELLIA:!DES:!MD5:!PSK:!RC4;
    ssl_prefer_server_ciphers on;

    location / {
        proxy_set_header    Host $host;
        proxy_set_header    X-Real-IP $remote_addr;
        proxy_set_header    X-Forwarded-For $proxy_add_x_forwarded_for;
        proxy_set_header    X-Forwarded-Proto $scheme;
        proxy_pass          http://verdaccio_v4_root;
        proxy_read_timeout  600;
        proxy_redirect off;
    }

    location ~ ^/verdaccio/(.*)$ {
        proxy_set_header X-Real-IP $remote_addr;
        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
        proxy_set_header Host $host;
        proxy_set_header X-NginX-Proxy true;
        proxy_pass http://verdaccio_v4_root/$1;
        proxy_redirect off;
    }
}

Run behind reverse proxy with different domain and port

Sub-directory

If the whole URL is being used for Verdaccio, you don't need to define a url_prefix, otherwise you would need something like this in your config.yaml.

url_prefix: /sub_directory/

If you run Verdaccio behind reverse proxy, you may noticed all resource file served as relative path, like http://127.0.0.1:4873/-/static

To resolve this issue, you should send real domain and port to Verdaccio with Host header

Nginx configure should look like this:

location / {
    proxy_pass http://127.0.0.1:4873/;
    proxy_set_header Host            $host:$server_port;
    proxy_set_header X-Forwarded-For $remote_addr;
    proxy_set_header X-Forwarded-Proto $scheme;
}

For this case, url_prefix should NOT set in Verdaccio config

---

or a sub-directory installation:

location ~ ^/verdaccio/(.*)$ {
    proxy_pass http://127.0.0.1:4873/$1;
    proxy_set_header Host            $host:$server_port;
    proxy_set_header X-Forwarded-For $remote_addr;
    proxy_set_header X-Forwarded-Proto $scheme;
}

For this case, url_prefix should set to /verdaccio/

Note: There is a slash after the install path (https://your-domain:port/verdaccio/)!

Overriding the public url

Since verdaccio@5.0.0

The new VERDACCIO_PUBLIC_URL is intended to be used behind proxies, this variable will be used for:

• Used as base path to serve UI resources as (js, favicon, etc)
• Used on return metadata dist base path
• Ignores host and X-Forwarded-Proto headers
• If url_prefix is defined would be appened to the env variable.

VERDACCIO_PUBLIC_URL='https://somedomain.org';
url_prefix: '/my_prefix'

// url -> https://somedomain.org/my_prefix/

VERDACCIO_PUBLIC_URL='https://somedomain.org';
url_prefix: '/'

// url -> https://somedomain.org/

VERDACCIO_PUBLIC_URL='https://somedomain.org/first_prefix';
url_prefix: '/second_prefix'

// url -> https://somedomain.org/second_prefix/'